
- Home
- Solar panels
- Solar panel cost
Federal solar discount gets smaller 1 Jan 2027. Last standard install: Fri 18 Dec. Premium installs to 23 Dec, back 11 Jan.
How much does solar cost in Melbourne?
Solar panel cost depends on the system size, your roof and the parts you choose. Here is what Melbourne homes typically pay, what changes the price and what comes off it. When you are ready, you get one written price for your roof.
See average Melbourne pricesCalls 7am to 5pm. Send the form any time.
- REC 34791Registered electrical contractor, Energy Safe Victoria
- SAA accreditedSolar design and install (Ed Yuksel, no. S9457770)
- Authorised retailerSolar Victoria rebate program
- Approved SellerNew Energy Tech Consumer Code
- $20 millionPublic liability insurance
Each one can be checked on a public register.
Check our licences (opens in a new tab)Start your free quote. What are you after?
What Melbourne homes typically pay
Average prices for standard solar systems in Melbourne, from an independent monthly price survey (1 November 2026). They include the federal solar discount and GST. They are market averages, not our prices: yours comes in writing after we check your roof.
| System size | Average price, Melbourne | Panels (440 W) |
|---|---|---|
| 5 kW | $5,120 | About 11 |
| 6 kW | $5,750 | About 14 |
| 7 kW | $6,450 | About 16 |
| 10 kW | $8,870 | About 23 |
Source: Solar Choice price index, Melbourne, 1 November 2026. A 6.6kW system usually sits between the 6 kW and 7 kW averages.
What goes into a solar price
Six things make up every quote. Knowing them makes quotes easier to compare like for like.
Panels
Usually the biggest part. We fit three ranges, from Trina, Jinko and Aiko, so you choose between price and power per panel.
Inverter
Turns the panels’ power into power your home can use. A battery-ready inverter costs more now and saves changing it if you add a battery.
Mounting and cabling
Rails, roof fixings, isolators and cable, chosen for your roof type.
Installation
Licensed electricians and installers, safe work at height, then testing.
Switchboard work
Some boards need new safety switches or more room before solar can connect. We check yours before we price.
Approvals and certificates
Network approval, a Certificate of Electrical Safety and the paperwork for the federal discount.
What can add to the price
These are the things installers charge extra for. We look for every one of them at the roof and switchboard check, so they are in your written price, not added on the day.
A two-storey roof
More safety equipment and more time at height.
Several roof sections
Panels split across more than two roof faces take longer to lay out and cable.
Terracotta tiles
Brittle tiles need extra care, panel by panel.
A steep roof
Pitches above about 27 degrees need extra safety gear.
Microinverters or optimisers
Enphase or SolarEdge parts on each panel cost more, and help on shaded or split roofs.
A long cable run
An inverter or battery more than about 10 metres from the switchboard needs more cable and time.
Removing an old system
Taking down and disposing of old panels is extra.
A switchboard upgrade
An older board may need upgrading before solar can connect safely.
The rebate, and the real deadline
Two government programs bring the price down. The federal one gets smaller on 1 January 2027, based on the day your system is installed.
Sources: Clean Energy Regulator and Solar Victoria, checked 1 November 2026. Every rebate explained (opens in a new tab).
Is the cheapest quote the best deal?
A low price can hide cheaper parts, a rushed install or extras added on the day. 279 solar companies have collapsed in Australia since 2010, leaving their customers with workmanship warranties nobody can honour.
Compare quotes like for like, and ask what is included before you sign.
Check every quote names
- The panel and inverter brands and models
- The system size in kW, and how many panels
- Who installs it, and their SAA accreditation number
- Whether the rebate and federal discount are already taken off
- What happens to the price if something is found on the day
- The warranties on panels, inverter and workmanship

Meet the people on your roof
Energen is run by Ed Yuksel, a licensed electrician (REC 34791). The people who quote your job are the people who install it, and the same team picks up the phone afterwards.
Who we are (opens in a new tab)
What could solar save you?
Move the slider to your last quarterly bill. It is a rough guide that counts nothing for power sent back to the grid. Your written quote works from your actual bills.
Estimated saving per year
–
A rough guide, not a quote. Assumes solar covers about a third of your power use (about two thirds with a battery), Melbourne sun hours, about 27c/kWh, a $115 quarterly supply charge and no feed-in credit.
What happens after you send it
A call from our team
Not a call centre. We ask about your bills and roof, and whether a battery or EV is on the cards.
Roof and switchboard check
We look at the roof, shade and board before we price, so the quote is not changed by something we missed.
One written price
Panel layout, parts and any rebate already taken off. Take your time. No pressure.
Install day, then a direct line
You get a Certificate of Electrical Safety, and we stay your contact afterwards.
Get your free solar quote
About a minute. We usually reply the same business day.
Straight answers
What people ask about the cost of solar. Ask us anything else: if it is not worth doing, we will say so.
Why don’t you list a price for each system size?
Because a package price rarely survives a look at the roof. Roof type, storeys, shade, your switchboard and the parts you choose all change it. We check them first, then give you one written price with any rebate already taken off. It only changes if a rebate is not approved or the install date moves into 2027, and you see any change in writing first.
How much does a 6.6kW solar system cost in Melbourne?
The independent survey above puts the Melbourne average at $5,750 for 6 kW and $6,450 for 7 kW (1 November 2026), including the federal discount and GST, so a 6.6kW system usually sits between the two. Your price depends on your roof and the panels you choose.
How much is a 10kW solar system?
The same survey puts the Melbourne average at $8,870 for 10 kW. Bigger systems cost less per kW, but on single-phase power what you can send to the grid is usually capped at 5 kW, so we size to what your home uses.
Do the rebate and federal discount come off the price?
Yes. The federal discount comes off every eligible new system. If you are eligible for the Solar Victoria rebate and approved before install, up to $1,400 comes off as well. We upload your quote; you apply to Solar Victoria.
Is solar still worth it now that feed-in tariffs are low?
For most homes, yes, because every unit of solar you use yourself is one you do not buy from your retailer. Power sent back earns much less than it used to, so we size the system around what your home uses.
Does a quote cost anything?
No. The quote is free and there is no obligation. We never door-knock or cold-call.
Sources for the numbers on this page
- Solar Choice: solar panel price index, Melbourne averages (1 November 2026, standard offers, including the federal discount and GST) (opens in a new tab)
- Clean Energy Regulator: calculating small-scale certificates (deeming period 5 years for 2026 installs, 4 for 2027) (opens in a new tab)
- Solar Victoria: solar panel rebate eligibility (opens in a new tab)
- SolarQuotes: Victorian grid connection rules by network (export limits, current September 2026) (opens in a new tab)
- Why Solar: collapsed solar companies tracker (updated 27 Sep 2026) (opens in a new tab)
- Essential Services Commission: minimum feed-in tariff (no longer set from 1 July 2025) (opens in a new tab)
Last checked 7 November 2026.
